XHT One-stop PCB PCBA Manufacturing aims to provide clients with convenience, efficiency, and an integrated approach to complete the entire PCB and PCBA manufacturing process with a single supplier. This helps reduce communication and coordination costs and enhances project execution efficiency. By choosing XHT One-stop PCB PCBA Manufacturing, clients can focus on product development and market launch while ensuring a smooth manufacturing process and obtaining high-quality, reliable, and cost-effective PCBA products.
Who We Are
XHT is an All-in-One solution provider for the fabrication of high-reliability, multi-layer, complex boards. Our PCBA services include supply chain management, assembly, test & inspection, rework, and NPI (New Product Introduction). The combination of our experience since 2004 in PCB & PCBA provision serves as a solid base for miniaturization solutions, which include organic substrates and advanced packaging.
What We Do
Our highly experienced team, state-of-the-art technologies, and advanced processes enable us to deliver innovative and complete solutions. All this while ensuring cost-effectiveness in a global network supply chain. We operate with a can-do attitude and a heterogeneous engineering approach. This makes manufacturers’ reliance on multi-vendor operations redundant. Our common design rules throughout the design and fabrication stages minimize the need for compromise on off-the-shelf products, allowing us to develop innovative ones instead.
On-time delivery
Meet all order requirements from Prototypes to volumes
ON TIME, EVERY TIME.
Quality assurance
Comply with ISO, IATF, UL standards, Online SPI, AOI, X-Ray inspection equipment, 99.5% pass rate of product delivery.
Professional team
Expert Stackup team and 40+ High-precision CAM editor team. We are not only experienced but highly qualified.
Quick Response Service
We will respond to your inquiries and share the quotation within 12 hours.
| FPC PRODUCTION CAPABILITY | | |
| Item | Content | Regular Capability | Special |
| 1 | Layer | 1-6L | Above 8L |
| 2 | Max.Array Size | 500*600mm | 250*1500mm |
| 3 | Min.board Size | 1-*1mm | |
| 4 | Max.board thickness | 0.23mm | 0.4mm |
| 5 | Min.board thickness | 0.075mm | 0.065mm |
| 6 | (0.075mm≤T Tolerance±0.03mm | V | 575 |
| 7 | (0.035mm≤T Tolerance±0.05mm | ℃ | 130 |
| 8 | (0.6mm≤T Tolerance±0.1mm | %(50-260℃) | 0.5 |
| 9 | Max Drill bit Diameter | 6.5mm | |
| 10 | Min Drill bit Diameter | 0.20mm | 0.15mm |
| 11 | Routing tolerance | ±0.2mm | ±0.15mm |
| 12 | Min Base Copper | 1/3 OZ | 1/4 OZ |
| 13 | Max Base Copper | 2 OZ | 4 OZ |
| 14 | Min Coverlay Thickness | 1mil(PI0.5mil Adhesive 0.5mil) | |
| 15 | Max Coverlay Thickness | 2mil(PI1mil Adhesive 1mil) | |
| 16 | Tolerance of holes diameter(PTH) | ±0.05mm | |
| 17 | Tolerance of holes diameter(NPTH) | ±0.025mm | |
| 18 | Hole Position Deviation(hole to hole compared with the CAD data) | ±0.05mm | |
| 19 | Hole Position Deviation(copper foil to hole compared with the CAD data) | ±0.07mm | |
| 20 | PTH wall copper thickness | 12-18um | |
| 21 | Minimum Trace Width/Space | 1/3OZ Cu 1L 50/60um 1/2OZ 2L 70/80um 1OZ Cu 1L 70/80um 1OZ Cu 2L 80/90um | |
| 22 | Min distance copper foil to the edge | ±0.10mm | ±0.07mm |
| 23 | Offset tolerance of silk character | ±0.3mm | ±0.2mm |
| 24 | Soldermask printing offset tolerance | Photo sensitive:±0.1mm(±4mil) Printed backing:±0.3mm(±8mil) | ±0.075mm ±0.2mm |
| 25 | Soldermask thickness | Photo sensitive:0.007-0.02mm(0.3-0.8mil) Printed backing:0.01-0.025mm(0.4-1mil) | |
| 26 | Protective film alignment accuracy(joint offset tolerance) | ±0.15mm | ±0.10mm |
| 27 | Min protective film lamination spilled glue amount | 0.5mil Adhesive≤0.1mm(4mil) 1mil Adhesive≤0.15mm(6mil) | |
| 28 | Tin thickness(Max),(Min)/Tolerance | (0.2mil)-(2.0mil)±0.30mm | |
| 29 | Gold plating, Ni thickness(Gold finger or other parts) | 1-6 u inch | Min 30 u inch Max 280 u inch |
| 30 | Gold plating, Au thickness(Gold finger or other parts) | 1-6u inch | 1-10 u inch |
| 31 | ENIG Ni/Au thickness(Gold finger or other parts) | Ni:30-150u inch Au:±1u inch | 4 u inch |
| 32 | (OSP) | 0.2-0.8um | |
| 33 | Die Punching Min hole/tolerance | Min:0.5mm/±0.05mm | +0.06/-0mm |
| 34 | Alignment tolerance of manual joint operation | ±0.30mm | ±0.2 |
| 35 | Alignment tolerance of fixture joint operation | ±0.15mm | |
| TEST QUALITY CONTROL |
| Item | Testing Content | Condition |
| 1 | Voltage of E-test | 250±25V |
| 2 | Short circuit impedance | ≥100Ω |
| 3 | Open-circuit impedance | ≥100Ω |
| 4 | Solderability testing | 245±5℃,5Sec |
| 5 | Heat stress testing | 288±5℃,10Sec |
| 6 | Thermal resistance | 94V-0 |
| 7 | Min tolerance for impedance control | ±10% |
Printed Circuit Board (PCBA) Assembly Highlights
| General Capabilities | Surface Mount Technology |
| Pin Thru-Hole |
| Ball Grid Array |
| Functional, Flying Probe, Boundary Scan and In-Circuit Testing |
| Burn-In |
| Conformal Coating |
| RTV Encapsulation |
| Flexible Circuit |
| Equipment | Automated Screen Printing |
| AOI – Automated Optical Inspection |
| Convection Reflow Oven |
| General Products Lead Forming |
| Juki Pick and Place Equipment |
| Wave Soldering (RoHS and Lead) |
| In-Line and Batch Washers |
| Ionic Contamination Tester |
| 3D X-Ray |
| RoHS XRF Analyzer |
| Metcal Solder Stations |
| Agilent 3070 ICT |
| Acculogic Flying Probe |
| Thermotron Environmental Chamber |
| Desiccant Chambers |
| Dispatch Ovens |
| Automated Board Handlers |
| De-Paneling Equipment |
| Printed Circuit Board Assembly | Ball Grid Array |
| Clean and No Clean Flux Systems |
| Rigid, Flexible and Rigid / Flexible |
| Single & Double-Sided |
| Placement down to 01005 |
| Package Sizes |
| FBGA |
| LGA |
| QFN |
| Metal Core Insulated |
| Mixed Technology (SMT and Thru Hole) |
| RoHS and Leaded Process |
| Assembly Methods | Automated Assembly |
| Hand Insertion |
| Hand Soldering |
| Reflow |
| Wave Solder |
| Additional Services Provided | Conformal Coating |
| Repair & Refurbishment |
| Length | Min 2” |
| Max 18" |
| Width | Min 2” |
| Max 18" |
| Thickness | Min .031” |
| Max .125" |
| Lead Time (Manufacturing) | Standard 2 weeks |
| Production Volume | Low Volume to High Volume Prototype |
Product Packaging:
The EMS PCB Assembly product will be packaged securely in anti-static bags and placed in a sturdy cardboard box with protective foam inserts.
Shipping:
We offer worldwide shipping for the EMS PCB Assembly product. Shipping options include standard, expedited, and express delivery. Customers can choose their preferred shipping method during the checkout process.
All shipments will be tracked and customers will receive a tracking number once the product has been shipped. Shipping fees will be calculated at checkout based on the destination and selected shipping method.
FAQ:
Q1: What service do you have?
XHT: We provide turnkey solutions including PCB design, Software development, PCB Assembly, Enclosure design, Mold-making, Plastic injection, Finish product assembly, and function testing.
Q2: What are the main products of your PCB/PCBA services?
XHT: Our PCB/PCBA services are mainly for industries including Industrial control, Home appliances main boards, automotive electronics, Consumer electronics, Medical equipment, bank equipment, smart home, etc.
Q3: Is XHT a factory or trade company?
XHT: XHT is a 20-year experienced professional contract manufacturer to provides a stop Turnkey PCB assembly and electronics manufacturing service.
Q4: Can we inspect quality during production?
XHT: Yes, we are open and transparent on each production process with nothing to hide. Customers are welcome to inspect our production process and check in-house.
Q5: How can we ensure our information should not let the third party see our design?
XHT: We are willing to sign an NDA effect by customer side local law and promise to keep customers' data in high confidential level.
Q6: What files are required to get a quotation from you?
XHT: For OEM PCBA projects, please provide the Gerber data/files and an indication of related technical requirements as well as any special requirements if you have them; For ODM projects, please provide a Function List, so our engineering team can work on it.
Q7: What is the standard delivery term?
XHT: Delivery terms of EXW, FCA, FOB, DDU, etc. are all available based on each quote.
Q8: How long does it take for a PCBA quote?
XHT: Depends on the project's complexity. Normally 1-2 weeks is enough for our engineers to evaluate.
Q9: Do you have any minimum order quantity (MOQ) requirements?
XHT: No, we do not have MOQ requirements, we can support your projects starting from prototypes to mass productions.
Tell us your requirements about the FAQ by CLICKING HERE, so that we can provide a solution to save your budget and meet your needs!
